Introbotics Accu_Prober Capabilities.

ACCU-PROBER™ CAPABILITIES

The ACCU-Prober™ is loaded with capabilities!

Quick-Test capability is used for in-process checks and engineering or customer verification. Numerical impedance results and TDR WaveForms are generated.

Full-Test capability enables a standard or custom test specification with guided steps or imported CAD/CAM file. Full-Test guides the operator through each point to be tested. Test coupons (pre-routed or in- panel), panels, or individual boards can all be accommodated.

Differential Measurements are provided by the simultaneous generation of coupled TDR pulses. This simple, very effective technique provides true differential measurement. The probe calibration procedure eliminates probe-induced errors.

Measurement Automation accuracy is ensured by taking of up to eight (8) measurements per test point. Automatic fault detection notifies the operator to re-probe. Measurement automation ensures a very repeatable measurement process.

Intranet Network Support provides access to the test database, all reports and results and the WaveForm Viewer. CAD/CAM data can be downloaded to the ACCU-Prober™ to set up the computer guidance screen and set all test parameters. Report Writer and Waveform Viewer screens can be viewed and sent through your network.

Capabilities Summary List

Single-ended and differential controlled impedance testing
Accurately measures impedance, propagation delay, dielectric constant
Test coupons, boards, and panels
Measurement repeatability of 0.05 ohms and 4 psec (single standard deviation)
Accurately measure traces as short as 0.50" with a measurement system (including cable and probe) that achieves a TDR risetime=33 psec and falltime=78 psec
Built-in support for the Tektronix DSA8200 and older TDS8XXX series of TDR instrumentation
Step-by step calibration procedure with a 50Ohms and/or a 28Ohms airlines
Ergonomic operator interface
Test Speed 1-4 seconds per test point
Simplified program setup through data entry or CAD/CAM importation
Flexible reporting package allows output to printer and many other formats (MSWord, Excel, html, etc.)
Extremely robust probe
Software control of Static Isolation Unit virtually eliminates static damage of TDR instrumentation

ACCU-Prober™ Links

Capabilities - Probe Tip - HFT Report Writer™ - Standards Compliance
Specifications - Systems and Options - WaveForm Viewer™

Do you have a requirement for high volume, controlled impedance testing? Consider Introbotics' CI1000 Controlled Impedance Tester! The CI1000™ combines the speed and accuracy of a robotic system with the same precision as the ACCU-Prober™.

INTROBOTICS CORPORATION
4208 Balloon Park Road NE Albuquerque, NM 87109
Tel: (505) 345-7785 Fax: (505) 345-7790 Email: info@introbotics.com